◤▄◥◣▍(●)▎▋ ◤●)▍▃▅◣ ▎◤ ▃ ▅ ▂◥ ◣\ ◤ ◢▅▂▅▃ ▄ ◣
▋(●)▍ ▊▏▅◤▄ ◥▄◤˙)▍▉ ▊▎◢◤▄◥◣▊▏▍◢◢ ◢◤▅▁◥\◣▋
◥▅◢◣▋ ▂▅▄▅◥▃◥▄◤▋◣◥ ▋▋(●)▍|▎▍|◤◢▋ ◤◢◤▆ ▋▊▏
◥▆▃▅▄ ◤▄◥◥ ▂▄▅▂▄▆◣ ▃◣ ◥▅◢◤ ◤ ▂▋▕▎▎█ ▎▋▎▎▍
▋▎◥▄◥▍(●)▋▍◤▃▄ ▃▁▂▃▃▂◣▅▃▄◤◤▅◥◥▋ ◣◥◣ ◢▋ ▍
▎▋ ◥▄▍◥▅◢◢◤▅ ▂▅▃▅▆▅▃▅▄◣◣▋▋(●)▋▍\◥◥ ▅▄◤ ▍▏
◣◥◣◣▂▊ ▅▃ ▄ ◤▄▂▄▃◢▂◥◥ ◥▎▍◣◥▅◢◢◥◣▃▆▃▆◤▋▋
▅◣▅▃▎\▄▂▃▅▃▅◤◤▄◤▅◣▊▋▊▋▋◥◣▅▃▃◥◣▂▅▂▅◢ ◤◤
◣◥▄◥▍▏|▂▅▃▔▂▄◤ ▌▍▎▍▍▎▍▎▍◥▄▅▃▆◥▄▅▃▅▄ ◢ ◢
◥◣ ▎▎▎▍▂▅▃▄▅◥◤▎▎◣◥▃ ◢◤▋▃▂▅▃ ▅◥▅▃ ▆▂▄▅▂◢
\◣ ▅ ▍▋﹨|▄ ◢◤(●)▍▋ ◣ ◥▂▅ ▂◤▆▃◥◣◥▄ ◣▆ ▅▅▆▂▅ ◢
◥▅▄▏▏▍▊▄▅◤◣▃◤ ▍◥▄ ▂▅▄▆ ◢▅◣▎▍▍◣ ◤▅▂▄▇▁▄◤
▋(●▍\▋│/ ▄◤◤▆ ▂◥◥◥▄▂▅▃◢/◤▃ ▍▋▍◤ ▄◤▆▂◤▅▇▅█
◥◥▄▎| ▎\▋ ▃ ◢◤▅◥◥◣▃▆▅▅▆ ▄◥◣▄◤ ◤ ▃▅◤▅ ▂▄▅▆▅
◣ ▅ ▏▏\▊▊▎/▋▋(●)▋▍▃▅▃▆▁▃▂ ▆◤▄▆◤◤▃◤ ◣∕ /∕/
▃◣ \▋ ∕▍\ ▏◣◣▃◤◤▂▁▃▅ ▁▃▂▆▂▃◢◢▄◤◤▆▅▆∕/ ∕
▃▆◣▏▍▊▎|▋ ▃▄▃▅▃▅ ▂▄◤▆▁▂▁▆▂▄▄▅▅▆▇ ▂▃▄▄▃▂
▄▂▊◥ ﹨▍﹨\▎◥▆▂▁▅▆▂▄|▔ ╱ ▅◣/▂▁▄▆▅▆▁▂▁▂▁▂▃
◣▃▅ ▏▎\◥ \/│▋ ▁▃▁▔▅ ▍ ∕/ ▁▃▅ ▂▃▅▄▃▂▃▅▆▄▃ ▄
▅▄▊/▋▊▕▎\∕/◢ ▄◣▂▆▅▊Ι▅▆◤◤◤▄▂▃▂▄▂▃▄▃▄▂▃ ▅
▄▂▍▎▊/▍/▍|▎\ ▋ ◤//▊◥◤◢◣▂▃▂▁▃▅▃◤▄◤◤◤◤▅◤◤▃▅
◤▄▋ \( ▏◤∕◣﹨\◥▅◤▋▍ ▕▁▋▄ ▃▆ ◥▅▃◢▅▄▃▂▃▄▅◤◤◤
▋▋◥▍) \\▎/▊◥\|▊▅▄◢▅▆▃▄◢◣▅▃◣▂▃▅▃▄▆▅◤◤◤▁▃▄
标 题: Starry Night
发信站: 水木社区 (Wed Jan 30 22:11:16 2013), 站内
好不容易终于找到原因了，还测试了用fterm直接黏贴也不行，
最后发现应该是水木系统的关系，不支持精简代码的缘故。
一般使用*[;m，只要色码最前面加上”;”，应该就会还原颜色，
也就是可以消除前一个字符的高亮，但是水木的系统似乎不支持，
必须用正统的*[0m才可以，所以假设色码是*[1;31m▋*[;33m◢，
照理说通常三角色块会显示为暗黄色，但水木的系统不会，
会忽略”;”，也就是显示成亮黄三角，
只要在前面加上一个”0”成为*[0;33m◢就可以正确显示了，
从PTT复制过来的时候想必也是如此情况，
这可能和台湾盛行PCman有关，因为PCman支持这种精简代码的显示法，
，所以如果是用PCman复制的ANSI图，色码会自动精简去掉”0”，
在水木这种系统就会显示不正常了，但我想这应该是PCman的问题，
正统的色码应该是要加上”0”去还原的。
前面的史昂能正确显示，应该是因为没有高亮的关系，
现在用另外的复制色码法，应该就不会有问题了。
手动改的话就实在累人，水木在ANSI编辑方面的系统不太友善呢。[Space]
﹨
﹨ ﹨
Ι
﹨
Title: Starry Night
Sending site: Shuimu Community Wed Jan 30 22:11:16 2013 , within the site
Finally I found the reason. I also tried pasting it directly using fterm but it didn’t work either.
Finally, I found out that it should be due to the Shuimu system which does not support streamlined code.
Generally use *[;m as long as the color code is preceded by ; and the color should be restored.
That means you can eliminate the highlight of the previous character, but Mizuki’s system doesn’t seem to support it.
You must use the orthodox *[0m, so assuming the color code is *[1;31m *[;33m
Logically speaking, usually the three character blocks will be displayed in dark yellow, but Mizuki's system will not
will be ignored; that is, displayed as a bright yellow triangle
Just add a 0 in front to become *[0;33m and it will be displayed correctly.
This must also be the case when copying from PTT.
This may be related to the popularity of PCman in Taiwan because PCman supports this simplified code display method.
Therefore, if the ANSI diagram is copied using PCman, the color code will be automatically streamlined and removed to 0
In a system like Mizuki, the display will be abnormal, but I think this should be a PCman problem.
The orthodox color code should be restored by adding 0
The previous Shion can be displayed correctly, probably because there is no highlighting.
Now if you use another copy color code method, there should be no problem.
Manual modification is really tiring. Mizuki’s ANSI editing system is not very friendly [Space]
