发信人: foggyyfoggyy (;我是一只草莓), 信区: ANSI
标 题: 怎样写好美术字——1.统一 by flubber
发信站: 日月光华 (2003年01月08日00:08:29 星期三), 站内信件
统一
一、大小
统一首先是大小的统一,每个字的长宽一致。这一点是最起码的,但很多新手仍
没有注意,许多人的作业里面"富"字都比"贵"字宽许多。
下面这四个字都是17*6的大小
___█___ ___█___ ▃____ ▃__●__▃ ▃__▃ _______▃ ▃____ ____█____1
___█___ ___█___ █______█ █ █ █ ____█____2
▃____▃ █ █ ▃____ █______█ █ █ █________ ▃____ ____█____3
█____█ ╲ ╱ █╲____▃ █__█ █ █ ╱▃_▅_4
╲ ╱ ╲╱ ▃____ █ ╲ █ █ ▃____ ╱ ▃__█ 5
_█__█_ __╱╲▂ █_▃ ╲▃ _█ █ ╱ ▃___█ 6
12345678901234567 12345678901234567 12345678901234567 12345678901234567
二、风格
其次,是风格的统一,风格包括很多,例如笔画的粗细(作业是横细竖粗),笔
画的连和断,转角出头不出头,笔划末端加不加字脚末端加不加字脚,等等。
________ ________ 笔画风格中最难处理的是撇和捺,尤其在AsciiArt中
█ █ ,受到字符的限制,怎么把撇捺写好,写得和整体统一,
█ 撇 █ █ 捺 █ 就是最常遇到的问题。就这种字体来说,横平竖直,在里
█ █ █ █ 面加上斜线,风格就不太统一。通常情况下,可以把撇捺
______█ █______ 象这样处理。
鼓字右边有个交叉,应该怎么办?写美术字不要拘泥于字典写法,要大胆变形,
常见的有几种解决方法。个人觉得第三种比较好看,但在不同的字当中可以因地制宜
,灵活应用。
___█___ ___█___ ___█___ ___█___ ___█___ ___█___
___█___ ___█__ ___█___ ___█___ ___█___ ___█___
________ █ █ ________ █ █ ________ █ █
█____█ █ █ █____█ █ ___█ █____█ █ █
▃ ▃ █___█_ ▃ ▃ █_█___ ▃ ▃ █ ___█
_█__█_ _____█ _█__█_ ___█ █ _█__█_ ___█ __
相应地,浪字右下的撇捺可以这样变形处理。
▃____ ▃__●__▃ ▃____ ▃__●__▃
█______█ █______█
▃____ █______█ ▃____ █______█
█╲____▃ █ ____▃
▃____ █ ╲ ▃____ █ █
█_▃ ╲▃ █_ █__▃
--
※ 来源:·日月光华 bbs.fudan.edu.cn·[FROM: 10.100.113.45]
Sender: foggyyfoggyy ;I am a strawberry, message area: ANSI
Title: How to write artistic calligraphy well 1. Unify by flubber
Sending site: Sun and Moon Guanghua Wednesday, January 8, 2003 at 00:08:29, site mail
Unite
one size
The first thing to unify is the unification of size. The length and width of each character are the same. This is the minimum, but many novices still
I didn't notice that in many people's homework, the word "rich" is much wider than the word "expensive".
The following four characters are all in size 17*6
1
2
3
4
5
6
12345678901234567 12345678901234567 12345678901234567 12345678901234567
Two styles
The second is the unification of style. Style includes many things, such as the thickness of strokes. The homework is thin horizontal strokes and thick strokes vertically.
The drawings are connected and broken, the corners are pointed but not pointed, the strokes are added at the end or not, the strokes are added at the end or not, etc.
The most difficult thing to deal with in stroke style is strokes and strokes, especially in AsciiArt.
Due to the limitation of characters, how can I write the words well and make them consistent with the whole thing?
This is the most common problem encountered. For this font, it is horizontal and vertical.
If you add a slash to the surface, the style will not be consistent. Normally, you can suppress it.
Treat it like this
There is a cross on the right side of the word drum. What should I do? Don’t stick to the dictionary writing method when writing artistic calligraphy. Be bold and deform it.
There are several common solutions. Personally, I think the third one looks better, but it can be adapted to different characters according to local conditions.
Flexible application
Correspondingly, the stroke on the lower right side of the word "wave" can be deformed like this
Source: Sun and Moon Guanghua bbs.fudan.edu.cn [FROM: 10.100.113.45]