Sender: hw fun, message area: ANSI Discuss Title: Re: [Reprint] Interim Management Measures for Sun and Moon Guanghua Station Activity Boards Sending site: Sun and Moon Guanghua Tuesday, February 06, 2007 22:38:36, site mail I don’t want to go through the source code I used c3 to capture TCP packets and took a look. There is *[K at the beginning of each line on the board and sometimes not at the end. I want to find out the rules. But I haven't found any explanation for the contradiction at all. Controlling the code at 252 takes care of the *[K at the beginning? So is it safer to control the code at 249? Haha. Remember the early activities? Kanban code length seems to be limited to about 150 characters In terms of adding *[K, the *[m at the end of each line is very important. In fact, the key is to change the background color to the default, otherwise *[K will be erased. When you click, a line of background will be erased. If there must be *[K at the beginning of the line, then padding of spaces at the end of the line does not seem necessary, but padding is a good thing and there is no problem. Of course, there will definitely be problems if the number of characters in a line exceeds 80. There should not be too many spaces at the end of the line. Articles that are not large in length may have too many spaces at the end. Two spaces may not have much impact, but it will definitely not work on the billboard. But this should be checked, haha. Blinking now clearly states that it is not available. I remember that it was only recommended not to be used in the past. One or two characters in the entire work will flash as if It's also possible. There is a piece of it on the system dashboard with a flashing * haha Mentioned in the masterpieces of Spirit Fairy Rain and Soul of Rain: Tianliang is a good demon: : Why does it start with *[m... : In fact, it should be the first one to use *[0m : Use *[m... : Mentioned in tinyfat's 2007 New Year's masterpiece: : : Learn to make Kanban boards : : : : Generally speaking : : : : Each Kanban board can have up to 7 lines. Generally speaking, from the perspective of display effect, it is recommended to use 6 lines. Each line of code must not exceed : : 252 characters, including spaces and all other characters, otherwise it will not be displayed completely. : ............. omitted below BBS client detection program only supports cterm fterm sterm qterm and WinXP telnet You are currently using ctermIII fterm sterm Win telnet qterm <SFC 100,222,255 T 0, 10,"CTERMIII" > Source: Sun and Moon Guanghua bbs.fudan.edu.cn [FROM: 222.70.19.85] Modification: hw modified this article at 22:54:46 on February 06 [FROM: 222.70.19.85]