发信人: wanmy (02MM·frere cadet), 信区: ANSI_Discuss
标 题: [组三]第四章作业 by bluerey
发信站: 日月光华 (2007年01月31日19:16:38 星期三), 站内信件
【 以下文字转载自 wanmy 的信箱 】
【 原文由 bluerey 所发表 】
A类作业
1、用线条画多边形
╱╲
╱ ╲
▔▔▔▔ _____
╱ ╱
╱ ╱
__ ▔▔▔▔▔
╱ ╲
︳ │
╲__╱
3、关于这几章学习中的问题,我想主要有两个
1)我想知道怎样可以写出经复制、转载、或插入其他内容等操作之后还能
正常显示的代码?=.=或者说,能有比较大的几率正常显示?
a、因为有时候明明有标高低亮,为啥复制之后就会变样呢?@@
对于fterm复制之后代码变动的原理不是太明白,jz~
b、还有就是,发现改变ansi在一篇文章中的出现地方,随着分页的不同,也会影响高
低亮和显示,
这个是不是在行首行末设置高低亮及*[m就可以了?
而在每行行首标记*[0;1;31m的话,前一行末尾还需要设置*[m吗?
2)我想知道色块能画出水平的斜线么?
比如我想画一根斜放的铅笔,该怎么画呢?这是前一阵做一个ansi时候遇到的问题。
而且,如果上面一部分是色块,下面接一根线条的铅笔,会不会不太和谐?@@
大致就这两个问题先~
B类作业
想画菱形来着。。
▁▂▃▄▅▆▇█▇▆▅▄▃▂▁
█▇▆▅▄▃▂▁▂▃▄▅▆▇█
C类作业
1、主要借鉴了精华区flubber的文章
可以画出细腻而平滑的纵向曲线
| ←单字节 |
▕ ←右竖线 ▕
│ ←制表符 │
︳ ←左竖线 ︳
▏ ←色块 ▏
| ←第二个单字节,循环
▕
│
︳
▏
2、自创灌水表情
就做个包子系列吧@.@
ミ ミ !!! ミ
╱ ゛||| ╱ ゛ノ ╱ ╲
∕― ― ゝ ∕◎ ◎ ゝ ○ > < ○
﹨______丿 ﹨______丿 ╰-----╯
ミ ミ ミ
╱ ╲ ╱ ゛╬ ╱ ╲
∕︿ ︿ ゝ ∕﹃ ﹃ ゝ ∕〤 〤 ゝ
\ミ ミ丿 ﹨______丿 ﹨ ~ 丿
﹊﹊﹊﹊ ﹊﹊﹊
╭╮
ミ ミ 丿 ミ WOW
╱ ゛ ∧ ╱ ﹨☉ ╱ ゛ノ
∕︿ ︿ ︺ ∕@ @ ゝ ∕· · ゝ
﹨______丿 ﹨______丿 ﹨_0___丿
-----
※ 来源:·日月光华 bbs.fudan.edu.cn·[FROM: 218.79.161.195]
※ 修改:·bluerey 於 01月30日21:44:18 修改本文·[FROM: 218.79.161.195]
--
※ 转寄:·日月光华 bbs.fudan.edu.cn·[FROM: 218.79.161.195]
--
※ 转载:·日月光华 bbs.fudan.edu.cn·[FROM: 58.24.226.230]
Sender: wanmy 02MM frere cadet, message area: ANSI Discuss
Title: [Group 3] Chapter 4 Assignment by bluerey
Sending site: Sun and Moon Guanghua Wednesday, January 31, 2007 19:16:38, site mail
The following text is reproduced from wanmy's mailbox
Originally published by bluerey
Class A work
1 Draw polygons with lines
3 Regarding the problems in studying these chapters, I think there are two main ones.
1 I want to know how to write something that can still be read after copying, reprinting or inserting other content.
The code is displayed normally. In other words, it has a relatively high probability of being displayed normally.
a Because sometimes it is clear that there is a high mark and a low light. Why does it change after copying @@
I don’t quite understand the principle of code changes after fterm copying jz
b Another thing is that I found that changing the place where ansi appears in an article will also affect the high performance depending on the paging.
Low light and display
Is this just a matter of setting high and low brightness and *[m at the beginning and end of the line?
If *[0;1;31m is marked at the beginning of each line, do we still need to set *[m at the end of the previous line?
2 I want to know if the color block can draw horizontal diagonal lines?
For example, I want to draw a pencil placed diagonally. How should I draw it? This is a problem I encountered when I was making an ansi a while ago.
And if the top part is a color block and there is a pencil line below, wouldn’t it be unharmonious @@
Roughly speaking, these two questions first
Category B homework
I want to draw a rhombus
Category C homework
1 Mainly based on the article of flubber in the essence area
Can draw delicate and smooth vertical curves
single byte
right vertical line
Tabs
left vertical line
color block
Second single byte loop
2 Self-created water emoticons
Let’s make a series of steamed buns@.@
ミ ミ !!! ミ
゛ ゛ノ
ゝ ゝ
﹨ 丿 ﹨ 丿
ミ ミ ミ
゛
ゝ ゝ ゝ
ミ ミ丿 ﹨ 丿 ﹨ 丿
ミ ミ 丿 ミ WOW
゛ ﹨ ゛ノ
ゝ ゝ
﹨ 丿 ﹨ 丿 ﹨ 丿
Source: Sun and Moon Guanghua bbs.fudan.edu.cn [FROM: 218.79.161.195]
Modification: bluerey modified this article at 21:44:18 on January 30 [FROM: 218.79.161.195]
Forward: Sun and Moon Guanghua bbs.fudan.edu.cn [FROM: 218.79.161.195]
Reprint: Sun and Moon Guanghua bbs.fudan.edu.cn [FROM: 58.24.226.230]