发信人: NSgan (0558·令吾勿拔·守身如玉小王子|开始努力), 信区: ANSI
标 题: Re: [组二]第二章作业 by EverLost
发信站: 日月光华 (2007年08月07日18:57:44 星期二), 站内信件
。。。很难看倒是不见得,不过当然也不见得很好看。。。=.=
透明色的运用是正确的,但是建议在用透明色的时候少用色块和高亮
高亮的透明效果不是很好。。。
而如果你要用低亮的话那用色块就没必要了,而且可以克服色块的缝
就是说,你可以用背景色直接做,而且也可以简单一点。。。
比如这样。。。
虽然。。。也不见得好看。。。咳咳。。。
简化代码。。。
你的答案是 *[1;4;5;45;31mA*[0;32mB*[42mC*[m 很可惜这个答案错了,但就差一点
~~~~~~~\
这个控制符错啦,应该是*[0;32;45m
注意,这个控制符中的0结束了前面的所有特殊效果,但也还原了前景色和背景色,所以
你还要在0之后重新输入前景色和背景色控制符,那个45是省不了的
做好题之后应该要检验一下和原码的效果一不一样的嘛,偷懒了咧菠萝兄啊
嗯。。。至于规范代码的意义,当然是方便自己也方便他人,这是一种尊重啦
【 在 NSgan (0558·令吾勿拔·守身如玉小王子|开始努力) 的大作中提到: 】
【 以下文字转载自 NSgan 的信箱 】
【 原文由 EverLost 所发表 】
老師說我把他的名字寫得好難得看...>.<
555555
██ ██████ ██████ ███ ██ ██
███ ██ ███ ███ █ █ ███ ██
████ ██ ██ ██ █ █ ████ ██
██ ██ ███ ██ ██ ████ ██ ██
██ ██ ███████ █ ███ ██ ██
██ ████ ███ █████ ███ ████
██ ███ ██ ███ █ ███ ███
██ ██ ███ ███ ██ ██
██ ██████ ███████ ██ ██
代碼化簡哢哢
*[1;4;5;45;31mA*[0;32mB*[42mC*[m
高亮;下劃綫;閃爍;暗紫色背景;紅色A
關閉閃爍;綠色高亮字體B
綠色背景C
效果~~~
ABC
簡化代碼的意義當然是讓我這種ansi白痴看得懂咯~~然後還方便日後的修改~~~
--
EverLost
--
--
--
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
ANSI 2007 暑期短期培训班
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
如有任何疑问,请到4区ANSI版咨询。报名事宜请参考ANSI版置底
※ 来源:·日月光华 bbs.fudan.edu.cn·[FROM: 61.170.224.15]
※ 修改:·NSgan 於 08月07日19:00:38 修改本文·[FROM: 61.170.224.15]
Sender: NSgan 0558 Tell me not to pull out the little prince, keep your body like a jade, start working hard, message area: ANSI
Title: Re: [Group 2] Chapter 2 Homework by EverLost
Sending site: Sun and Moon Guanghua Tuesday, August 07, 2007 18:57:44, site mail
It doesn’t necessarily look ugly, but it certainly doesn’t necessarily look good.
The use of transparent colors is correct, but it is recommended to use less color blocks and highlights when using transparent colors.
Highlight transparency effect is not very good
And if you want to use low brightness, there is no need to use color blocks, and you can overcome the seams of the color blocks.
That is to say, you can do it directly using the background color, and it can also be simpler.
Like this
Although it doesn’t necessarily look good, cough cough
Simplify the code
Your answer is *[1;4;5;45;31mA*[0;32mB*[42mC*[m. It’s a pity that this answer is wrong, but it’s just a close call.
This control symbol is wrong. It should be *[0;32;45m
Note that the 0 in this control character ends all previous special effects, but also restores the foreground and background colors, so
You have to re-enter the foreground color and background color control characters after 0. The 45 is unavoidable.
After completing the questions, you should check whether the effect is different from the original code. Are you lazy? Brother Pineapple.
Well, as for the meaning of standardized code, of course it is convenient for yourself and others. This is a kind of respect.
In the masterpiece of NSgan 0558 "Ling me not to pull out, the little prince who keeps his body like jade and starts working hard" mentioned:
The following text is reproduced from NSgan’s mailbox
Originally published by EverLost
The teacher said I wrote his name so hard to read...>.<
555555
Code simplification
*[1;4;5;45;31mA*[0;32mB*[42mC*[m
Highlight; underline; flash; dark purple background; red A
Off flashing; green highlighted font B
Green background C
Effect
ABC
The purpose of simplifying the code is of course to make it easier for ansi idiots like me to understand it, and to facilitate future modifications.
EverLost
ANSI 2007 Summer Short-term Training Course
If you have any questions, please consult the ANSI version of Zone 4. For registration information, please refer to the bottom of the ANSI version.
Source: Sun and Moon Guanghua bbs.fudan.edu.cn [FROM: 61.170.224.15]
Modification: NSgan modified this article at 19:00:38 on August 07 [FROM: 61.170.224.15]