发信人: MssCmm (临散伊潸·逆光), 信区: ANSI
标 题: Re: [组三]第七章作业 by linzhihuan
发信站: 日月光华 (2007年08月26日13:59:38 星期天), 站内信件
有一个挺主要的问题:
就是修改的图和最终效果差的挺多的
1.比如说,如果最后决定要用暗色,
那么原图修改的时候就可以把颜色定为暗色
这样很方便后面的修改
2.就是最后的图里面其实并没有白边,那么为虾米在转修改图的时候一定还留个白边涅..
其实就是修改的效果要尽可能和最终的效果一致
这样修改的部位会少很多
捏捏
最终的效果图还是三角型太多了嘛..
缝隙很大就显得怎么看怎么像转出来的...
用暗色块的好处就是可以少用三角啦啦啦
捏捏,反正下次修改色块的时候注意就好啦
【 在 MssCmm (临散伊潸·逆光) 的大作中提到: 】
: └╗ ╭───╮┌─┐─┐╭───╮┌───┐ ╔┘
: ╔┘ │↖↑↗││↑│↑││↖↑↗ │←┬→│ └╗
: └╗ │ ││↘└┐││ └┐│┌┘ ╔┘
: ╔┘ │←☆→│││☆││╰─☆─╮ │☆│ └╗
: └╗ │ │ ││└┐↘│ │┌┘│└┐ ╔┘
: ╔┘ │↙│↘││↑│↑│ ↙↓↘││←┴→│ └╗
: └╗ └─┴─┘└─└─┘╰───╯└───┘ ╔┘
: ╔┘ └╗
: └╗ ㊣ ︵╮ ╔┘
: ╔┘ │ ─┬㊣┬─ ㈱㈱-┐ ┐ ┐ ─┬─ ─┬─ ╰┘ └╗
: .................(以下省略)
--
BBS客户端探测程序(仅支持cterm、fterm、sterm、qterm以及WinXP telnet)
您当前所使用的是:
ctermIII fterm sterm Win telnet qterm <SFC(100,222,255) T(0,-10,"CTERMIII")>
※ 来源:·日月光华 bbs.fudan.edu.cn·[FROM: 218.78.236.78]
Sender: MssCmm Linsan Yilu Backlight, message area: ANSI
Title: Re: [Group 3] Chapter 7 Homework by linzhihuan
Sending site: Sun and Moon Guanghua August 26, 2007 13:59:38 Sunday, site mail
There is a very important problem
It’s just that the modified picture is quite different from the final effect.
1. For example, if you finally decide to use dark colors
Then when modifying the original image, you can set the color to dark
This is very convenient for subsequent modifications.
2. There is actually no white border in the final picture, so Xiami must leave a white border when converting and modifying the picture..
In fact, the effect of the modification should be as consistent as possible with the final effect.
This way there will be much fewer parts to modify.
pinch
The final rendering still has too many triangles...
The gap is so big that it looks like it's turned out...
The advantage of using dark blocks is that you can use less triangles.
Anyway, just pay attention next time when modifying the color blocks.
Mentioned in MssCmm Linsan Yilu's masterpiece:
:
:
:
:
:
:
:
:
: ㊣
: ㊣ ㈱㈱
: ............. omitted below
BBS client detection program only supports cterm fterm sterm qterm and WinXP telnet
You are currently using
ctermIII fterm sterm Win telnet qterm <SFC 100,222,255 T 0, 10,"CTERMIII" >
Source: Sun and Moon Guanghua bbs.fudan.edu.cn [FROM: 218.78.236.78]